Home Security

Protecting your home from would be thieves with a vigilant focus on crime prevention is a great way to ensure you feel safe and secure in your home, street and community.

There are many facets to home security and the following information is to help you ensure your home is safe and secure.

Step 1: Get to know your neighbour

Get to know your neighbour, look out for each other and report all suspicious activity to police.  

Sign up to ewatch and receive emails about crime prevention in your local area from your local police and share this information with your neighbours.

Step 2: Marking of valuables

You can easily achieve this by marking your property or purchasing commercially available products using micro dot technology.  it is also important to to keep a record of your valuables and hard to replace items.

The marking of your driver’s licence number on household property is strongly recommended. Write the letters “WA” before the numbers to indicate Western Australia, e.g., WA 1234567.

When the marked item is sold or disposed of, write the letter “S” after your driver’s licence number to indicate change of ownership. To obtain a UV pen please contact the NHW State Office.

Step 3: Fences, trees and shrubs

Your trees and shrubs should be trimmed or the front fence lowered to allow a clear view of your house. This will remove hiding places for the “would be” offender and improve your neighbour’s visibility should you need assistance.

Step 4: Backyard security

Consider putting up fences or other barriers, such as garage doors at either side of your home. This will make it more difficult for an offender to enter and work in the “safety” of your backyard. Also ensure that all tools are stored away and outbuildings are locked securely.

Step 5: Lighting

Good lighting, such as flood lamps, should be installed to minimise hiding spots for the “would be” offender, particularly while you are at home. “Motion sensor” or “reactive” lighting is excellent for this and is quite inexpensive to buy and install.

Step 6: Protect your power supply

Have a viewing window installed in the lid of your meter box, and a Western Power approved padlock or key lock installed. Circuit breaker switches installed within the home are also an advantage, but the meter box must still be locked.

Step 7: Door locks

Have door locks fitted without delay. Normal key in the knob locks, which are fitted to most homes, are a burglar’s delight. These locks must be backed up with a security lock. Fit a key operated lock (commonly referred to as a patio door bolt) to aluminium sliding doors. Do not rely upon manufacturer fitted locks or catches.

Step 8: Window locks

Windows that are not fitted with key operated locks are an easy target for offenders, and will offer little or no resistance. Key operated locks provide a much greater level of security than manufacturer fitted catches, there is a lock for every type of window. Remember; do not leave the keys in the locks.

Step 9: Security screens and doors

Have security screens fitted to the doors or portion of the windows that are left open for ventilation. This will prevent an offender from “walking in” on you. Remember, although security screens and doors increase your security, they are for use when you are at home. Ensure the doors are “key locked” as the latch (snib) device on many doors does not achieve maximum security.

Step 10: Alarms

Consider the installation of an Australian Standard 2201 approved burglar alarm. Intruders are far less likely to break into a house with an alarm system. An alarm will usually only tell you after an offender has entered your home. For immediate response to an alarm, the use of a monitoring service will make arrangements for your premises to be checked. All security products should be installed by licensed security installers.